Mobile station for cleaning and regeneration of industrial oils
The mobile station is capable of cleaning operational turbine, transformer and other industrial oils, as well as performing adsorption cleaning of these waste oils at enterprises where turbine units and machine tools are operated (CHP, GRES, machine-building industry enterprises, gas transportation enterprises and others).
The patented technology of thermogravitation cleaning, implemented in the mobile station, allows cleaning oils in a "gentle" mode, without removing additives (antioxidant, anticorrosive, demulsifying) in contrast to the traditional "separator" method.
Based on the results of tests conducted in 2010-2018, the technology and the mobile station received a positive conclusion from the industry research institute and were certified for industrial use.
Based on the results of tests conducted in 2010-2018, the technology and the mobile station received a positive conclusion from the industry research institute and were certified for industrial use.
For operational oils, cleaning is carried out in one stage – cleaning from mechanical impurities and water by a thermogravitation cleaning unit.
For used homogeneous oils, cleaning is carried out in three stages:
Stage 1 – cleaning from fur. impurities and water;
Stage 2 – adsorption purification from oxidation and aging products in the adsorber block;
Stage 3 – introduction of additives (if necessary).
The mobile station is based on a standard 40-foot container with installed oil cleaning equipment, which can be transported by car with a load capacity of 8-10 tons.
The container contains:
- oil purification unit from mechanical impurities and water;
- block of adsorbers for adsorption purification of oils,
- additive input unit,
- a container for purified oil.
Productivity - up to 4 thousand tons per year (up to 500 liters / hour) of regenerated oils.
For used homogeneous oils, cleaning is carried out in three stages:
Stage 1 – cleaning from fur. impurities and water;
Stage 2 – adsorption purification from oxidation and aging products in the adsorber block;
Stage 3 – introduction of additives (if necessary).
The mobile station is based on a standard 40-foot container with installed oil cleaning equipment, which can be transported by car with a load capacity of 8-10 tons.
The container contains:
- oil purification unit from mechanical impurities and water;
- block of adsorbers for adsorption purification of oils,
- additive input unit,
- a container for purified oil.
Productivity - up to 4 thousand tons per year (up to 500 liters / hour) of regenerated oils.